Specifications
MSF Series - Single Phase and Three Phase
Low profile dryers that operate in continuous flow full heat or auto batch.
- Capacities up to 725 bph
- 16' Fill Height
- Choice of continous flow "full heat" drying or optional auto-batch drying.
- Giant holding capacity allows long retention time.
- Effective plenum chamber surrounded by compartmentalized variable thickness columns.
- "Flip-up" access doors allow easy inspection of metering rolls while operating.
- Efficient fan & burner unit w/built-in vaporizer provide optimum airflow & heat.
- Modulating fuel flow valve maintains constant plenum temperature automatically.
- Heavy-duty augers & metering rolls provide trouble-free service.
- Auto moisture control guards against costly over/under drying.
- Visual monitor lights indicate system operation.
- Standard "off-the-shelf" TEFC electric motors.
MSF Series |
|||||
MODEL SPECIFICATIONS |
MSF-31010 230V-1P |
MSF-41515 230V-1P |
MSF-41515 240V-3P |
MSF-62520 240V-3P |
MSF-72525 240V-3P |
|---|---|---|---|---|---|
| Grain Columns (ft) | 10 | 10 | 10 | 15 | 15 |
| Grain Holding (Bu) | 317 | 317 | 317 | 475 | 475 |
| *1 Corn *4 (CF-AH) 22-17% | 310 | 415 | 415 | 625 | 725 |
| Corn (CF-A/H) 25-17% | 245 | 330 | 330 | 495 | 575 |
| Corn (A/B-D/C) 20-15% | 205 | 275 | 275 | 415 | 480 |
| Corn (A/B-D/C) 25-15% | 105 | 200 | 200 | 300 | 350 |
| Milo (A/B-D/C) 18-14% | 200 | 270 | 270 | 405 | 470 |
| Soybeans (A/B-D/C) 18-13% | 145 | 190 | 190 | 290 | 335 |
| Wheat (A/B-D/C) 18-13% | 185 | 245 | 245 | 370 | 430 |
| Sunflowers (A/B-D/C) 15-10% | 255 | 340 | 340 | 515 | 600 |
| Fan(s) 36", 1750 RPM (HP.) | 1-10/12 | 1-15 | 1-15 | 1-20 | 1-25 |
| Burner 70°F (M.BTU./HR.) | 2.03 | 2.90 | 2.90 | 3.31 | 3.75 |
| Leveling Auger 8" (HP.) | 1 | 1 | 1 | 2 | 2 |
| Unloading Auger 8" (HP.) | 1 | 1 | 1 | 1 | 1 |
| Metering (HP.-SCR.) | 1 | 1 | 1 | 1 | 1 |
| (Max Rate) *2 | 1200 | 1200 | 1200 | 1800 | 1800 |
| Electric Load (HP.) | 13 | 18 | 18 | 24 | 29 |
| Total Dryer *3 (AMPS) | 71.40 | 91.40 | 54.60 | 69.80 | 83.80 |
| Dryer Weight (LBS.) | 6,000 | 6,000 | 6,000 | 9,000 | 9,000 |
| NOTE: *1 Stated capacities are Wet Bushels at Listed
Input Moisture Content & are estimated Based on Drying Principles,
Field Results & Computer Simulation. Variances May Occur Due
to Grain Physiological Factors (Kernel Size, Chemical Composition,
Variety, Maturity), Excessive Fines, Adverse Weather Conditions,
Etc. *2 Actual Discharge Rate is controlled by metering roll speed adjustment at 5% to 100% of maximum rate. *3 Excludes Auxiliary load & unload motors. *4 Grain discharged hot from dryer at 17% output moisture should result in 15% to 15 1/2% final moisture content after cooling (dryeration). DELUX MFG. CO. reserves the right to change its products and their applications at anytime without notice or obligation. |
|||||